-- *****************************************************************
-- CISCO-SNMP-TARGET-CAPABILITY.my:
-- Cisco SNMP-TARGET-MIB AGENT-CAPABILITIES
--
-- July 2004, Rashmi Purandare
--
-- Copyright (c) 2003, 2004, 2006, 2008 by Cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-SNMP-TARGET-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ciscoAgentCapability
FROM CISCO-SMI;
ciscoSnmpTargetCapability MODULE-IDENTITY
LAST-UPDATED "200807210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com, cs-snmp@cisco.com"
DESCRIPTION
"The capabilities description of SNMP-TARGET-MIB."
REVISION "200807210000Z"
DESCRIPTION
"Added capability statement ciscoSnmpTargetCapc4710aceVA1R700
for ACE 4710 Application Control Engine Appliance.
Added VARIATION clause for snmpTargetSpinLock object in
ciscoSnmpTargetCapACSWV03R000 agent capability."
REVISION "200706220000Z"
DESCRIPTION
"Removed SYNTAX for snmpTargetAddrTDomain under
ciscoSnmpTargetCapCatOSV05R0501."
REVISION "200604110000Z"
DESCRIPTION
"Added capability statement ciscoSnmpTargetCapACSWV03R000
for Application Control Engine (ACE)."
REVISION "200407280000Z"
DESCRIPTION
"Added capabilities for VISM release 3.3."
REVISION "200309160000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 359 }
ciscoSnmpTargetCapCatOSV05R0501 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 5.5(1)."
STATUS current
DESCRIPTION
"SNMP-TARGET-MIB capabilities."
SUPPORTS SNMP-TARGET-MIB
INCLUDES {
snmpTargetBasicGroup,
snmpTargetResponseGroup,
snmpTargetCommandResponderGroup
}
VARIATION snmpTargetAddrTDomain
DESCRIPTION
"Only supports snmpUDPDomain."
VARIATION snmpTargetAddrStorageType
SYNTAX INTEGER {
volatile(2),
nonVolatile(3),
readOnly(5)
}
DESCRIPTION
"Only supports volatile(2), nonVolatile(3)
and readOnly(5)."
VARIATION snmpTargetParamsMPModel
SYNTAX INTEGER (0 ..0 | 1 ..1 | 3..3)
DESCRIPTION
"Only supports SNMPv1 (0), SNMPv2c (1),
and SNMPv3 (3)."
VARIATION snmpTargetParamsSecurityModel
SYNTAX INTEGER (1..3)
DESCRIPTION
"Only supports SNMPv1 (1), SNMPv2c (2) and
User-Based Security Model (3)."
VARIATION snmpTargetParamsSecurityName
SYNTAX SnmpAdminString (SIZE (1..32))
DESCRIPTION
"Maximum length supported is 32 characters."
VARIATION snmpTargetParamsStorageType
SYNTAX INTEGER {
volatile(2),
nonVolatile(3),
readOnly(5)
}
DESCRIPTION
"Only supports volatile(2), nonVolatile(3)
and readOnly(5)."
::= { ciscoSnmpTargetCapability 1 }
ciscoSnmpTargetCapVISM33 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco VISM Release 3.3"
STATUS current
DESCRIPTION
"SNMP-TARGET-MIB capabilities."
SUPPORTS SNMP-TARGET-MIB
INCLUDES { snmpTargetBasicGroup }
VARIATION snmpTargetSpinLock
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetAddrTDomain
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetAddrTAddress
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetAddrTagList
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetAddrParams
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetAddrStorageType
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetAddrRowStatus
ACCESS not-implemented
DESCRIPTION
"Not Supported"
VARIATION snmpTargetParamsMPModel
SYNTAX INTEGER (0)
ACCESS read-only
DESCRIPTION
"Read only access and supports
only SNMPv1(0)"
VARIATION snmpTargetParamsSecurityModel
SYNTAX INTEGER (1)
ACCESS read-only
DESCRIPTION
"Read only access and supports
only SNMPv1 (1)."
VARIATION snmpTargetParamsSecurityName
ACCESS not-implemented
DESCRIPTION
"Not supported"
VARIATION snmpTargetParamsSecurityLevel
SYNTAX INTEGER {
noAuthNoPriv(1)
}
ACCESS read-only
DESCRIPTION
"Read only access and supports
only noAuthNoPriv (1)."
VARIATION snmpTargetParamsStorageType
SYNTAX INTEGER {
readOnly(5)
}
ACCESS read-only
DESCRIPTION
"Read only access and only
supports readOnly(5) since it
cannot be modified."
VARIATION snmpTargetParamsRowStatus
SYNTAX INTEGER {
active(1)
}
ACCESS read-only
DESCRIPTION
"Read only access."
::= { ciscoSnmpTargetCapability 2 }
ciscoSnmpTargetCapACSWV03R000 AGENT-CAPABILITIES
PRODUCT-RELEASE "ACSW (Application Control Software) 3.0"
STATUS current
DESCRIPTION
"SNMP-TARGET-MIB capabilities."
SUPPORTS SNMP-TARGET-MIB
INCLUDES {
snmpTargetBasicGroup,
snmpTargetResponseGroup,
snmpTargetCommandResponderGroup
}
VARIATION snmpTargetSpinLock
ACCESS not-implemented
DESCRIPTION
"Not supported"
VARIATION snmpTargetAddrTDomain
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrTAddress
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrTagList
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrParams
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrStorageType
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrRowStatus
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsMPModel
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsSecurityModel
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsSecurityName
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsSecurityLevel
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsStorageType
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsRowStatus
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrTimeout
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrRetryCount
ACCESS read-only
DESCRIPTION
"Read only access."
::= { ciscoSnmpTargetCapability 3 }
ciscoSnmpTargetCapc4710aceVA1R700 AGENT-CAPABILITIES
PRODUCT-RELEASE "ACSW (Application Control Software) A1(7)
for ACE 4710 Application Control Engine
Appliance."
STATUS current
DESCRIPTION
"SNMP-TARGET-MIB capabilities."
SUPPORTS SNMP-TARGET-MIB
INCLUDES {
snmpTargetBasicGroup,
snmpTargetResponseGroup,
snmpTargetCommandResponderGroup
}
VARIATION snmpTargetSpinLock
ACCESS not-implemented
DESCRIPTION
"Not supported"
VARIATION snmpTargetAddrTDomain
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrTAddress
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrTagList
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrParams
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrStorageType
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrRowStatus
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsMPModel
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsSecurityModel
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsSecurityName
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsSecurityLevel
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsStorageType
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetParamsRowStatus
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrTimeout
ACCESS read-only
DESCRIPTION
"Read only access."
VARIATION snmpTargetAddrRetryCount
ACCESS read-only
DESCRIPTION
"Read only access."
::= { ciscoSnmpTargetCapability 4 }
END